Pipe Bending Machine Operation Process

Oct 07, 2024

Leave a message

Regularization of pipe shape
When designing and arranging pipes, avoid excessive arcs, arbitrary curves, compound bends, and arcs greater than 180°. Excessive arcs not only make the tooling bulky, but also are limited by the size of the pipe bending machine; the design of arbitrary curves and compound bends is very unreasonable, which greatly hinders mechanized and automated production, making it difficult for operators to get rid of heavy physical labor; arcs greater than 180° make it impossible for the pipe bending machine to unload the mold.
Standardization of bending radius
The bending radius should try to achieve "one tube one mold" and "multiple tubes one mold". For a pipe, no matter how many bends there are and what the bending angle is, there can only be one bending radius, because the pipe bending machine does not change the module during the bending process, which is "one tube one mold". And "multiple tubes one mold" means that pipes of the same diameter specification should try to use the same bending radius, that is, use the same set of modules to bend pipes of different shapes, which is conducive to reducing the number of modules.
Bending radius
The size of the catheter bending radius determines the size of the resistance encountered by the catheter during bending. Generally speaking, when the pipe diameter is large and the bending radius is small, it is easy to wrinkle and slip when bending, and the bending quality is difficult to guarantee. Therefore, it is generally better to select the R value of the pipe bending die to be 2-3 times the pipe diameter.
Bending forming speed
The main influence of the bending forming speed on the forming quality is: if the speed is too fast, it is easy to cause the flatness of the bending part of the conduit, the roundness does not meet the requirements, and the conduit is pulled and broken; if the speed is too slow, it is easy to cause the conduit to wrinkle and the pressing block to slip, and the large-diameter pipe is easy to form the conduit bending part to sink. According to a large number of tests on these two CNC pipe bending machines, the bending speed of the conduit is determined to be 20%-40% of the maximum bending speed of the machine.
Mandrel and its position
The mandrel mainly plays the role of supporting the inner wall of the bending radius of the conduit to prevent its deformation during the bending process. If the mandrel is not used when bending and forming domestic pipes on machine tools, its quality is difficult to guarantee. There are many forms of mandrels, such as columnar mandrels, universal single, double, triple, and quadruple ball head mandrels, directional single and multi-ball head mandrels, etc. In addition, the position of the mandrel also has a certain influence on the bending of the tube: theoretically, its tangent line should be flush with the tangent line of the tube bending die, but a large number of tests have shown that it is better to advance 1 to 2 mm, at which time the bending quality is ideal. Of course, if the advance amount is too large, the outer wall of the bent part will appear the so-called "goose head" phenomenon.