Semi-automatic pipe bending machine is a common mechanical processing equipment used to bend metal pipes into different shapes.
The following are the methods used by Jiangsu Lifu Machinery in the debugging of common semi-automatic pipe bending machines:
Check the pipe diameter and thickness: Before starting the commissioning, you need to check whether the pipe diameter and thickness meet the requirements. If the pipe size is incorrect, it may cause problems such as inaccurate bending angles or pipe rupture.
Adjust the position of the clamp: Semi-automatic pipe bending machines usually use clamps to fix the pipe, so it is necessary to check whether the position of the clamp is correct. If the clamp is not in the correct position, it may cause problems such as inaccurate bending angle or inconsistent length of the bent part.
3.Check the bending angle: During the debugging process, it is necessary to check whether the bending angle is accurate. If the bending angle is inaccurate, it may cause problems such as inconsistent length of the bending part or distortion of the pipe.
4. Check the bending speed: During the debugging process, it is necessary to check whether the bending speed is appropriate. If the bending speed is too fast, it may cause cracks in the pipe or inconsistent length of the bending part.
5. Check for abnormalities during processing: During the processing, it is necessary to check whether there are any abnormalities in the pipe at any time, such as the pipe being clamped or stuck. If any abnormality is found, it is necessary to stop the machine in time and deal with it.
The above are some common methods for debugging semi-automatic pipe bending machines. Operators need to make appropriate adjustments based on actual conditions.