The Important Part Of The Automatic Pipe Bending Machine

Oct 16, 2024

Leave a message

Important components of the fully automatic pipe bending machine:
1. Rocker arm, its function is to ensure that the bending radius of the pipe meets the requirements, and its clamping seat is to limit the rebound of the steel pipe during the bending process.
2. The pump station is divided into high-pressure and low-pressure parts to provide power for the opening and closing of the guide roller, the rocker arm clamping seat cylinder, the opening and closing of the push device trolley chuck, and the opening and closing of the straightening roller.
3. The guide roller device is composed of two sets of guide rollers, a frame and a clamping transmission system. The opening and closing of the guide roller is completed by hydraulic drive. Its function is to complete the horizontal bending of the steel pipe together with the rocker arm.
4. Drive device It is the power source of the push device.
5. Straightening roller one is to prevent vertical deformation during the bending process, and is used in conjunction with the floating anti-ellipse clamp to ensure that the ellipticity of the steel pipe after bending meets the requirements.
6. The push device (composed of a trolley, a bed, a drive shaft, a traction chain, etc.) pushes the steel pipe forward, and the steel pipe is bent under the action of the rocker arm and the guide roller