Introduction
Boiler Tube Bending Machine is an advanced mechanical equipment designed for batch production of boiler and serpentine tubes. It is mainly composed of an intuitive CNC multi-axis control unit, an integrated tube positioning device, an intelligent supercharger with a programmable boost coefficient, and high-quality components. The equipment is widely used in boiler manufacturing, thermal power generation, the chemical industry, aerospace, and other fields.

Feature
Efficient production
• Fully automated operation and process optimization: The boiler Tube Bending Machine adopts an intuitive CNC multi-axis control unit, combined with the Japanese Mitsubishi servo system, to achieve full automation of the tube bending process. Compared with traditional tube bending methods, this equipment can increase production efficiency by about 40%, significantly improving production capacity.
• Fast response and efficient processing: The rapid acceleration and deceleration capability of the servo system enables the Boiler Tube Bending Machine to complete the positioning and bending of the tube in a short time, reducing the waste of non-production time.
Accurate processing
• High-precision control system: The Boiler Tube Bending Machine is equipped with a high-precision CNC controller and sensor, which can monitor and adjust the bending angle, radius, and length of the tube in real-time. Through the closed-loop feedback system, the bending angle error is controlled within a very small range (such as within ±0.1°), meeting the needs of high-precision processing.
• Intelligent boosting and precise forming: The intelligent booster with a programmable boost coefficient can automatically adjust the boost coefficient according to the material, diameter, and wall thickness of the pipe, ensuring that the pipe is subjected to uniform and appropriate pressure during the bending process, thereby avoiding deformation and cracking of the pipe and achieving high-precision forming without mandrel bending.

Good stability
• High-quality components and reliable design: Boiler Tube Bending Machine adopts world-renowned high-quality components such as German Rexroth hydraulic system, French Schneider electrical components, Japanese NOK sealing rings, and Japanese Siemens or Mitsubishi CNC controllers. These components have undergone strict quality control and testing and can operate stably for a long time, reducing the failure rate and maintenance costs.
• Intelligent monitoring and fault warning: The equipment is equipped with an intelligent monitoring system that can monitor the operating status and key parameters of the equipment in real-time. Once an abnormality is found, the system will immediately issue a warning signal to remind the operator to deal with it in time, avoiding the impact of equipment failure on production.

Our Company
Jiangsu LiFu Machinery Technology Co., Ltd. is a professional manufacturer specializing in comprehensive industrial automation equipment solutions for the pipeline industry. Headquartered in Zhangjiagang, with a branch in Jiangyin, we focus on R&D, production, sales, and service of high-end metal pipe forming automation equipment. Our product categories include the CNC electric oil hybrid series, CNC all-electric bending series, pipe-cutting machines, end molding machines, and chamfer machines, which are widely used in automotive parts, aerospace, shipbuilding, and other industries.
FAQ
Q: How about the delivery time?
A: Usually, it takes 30 working days for production.
Q: Do you provide all the operations and maintenance manuals in English?
A: Rich in overseas transaction experience, we have a full set of documentation, user manuals, and assembly guidance, all in English. You do not need to have any concerns about language issues.
Q: Do you offer any after-sales services?
A: After finalizing the product, we clear up the production line and send you photos and videos for your assurance. Upon request, our experienced technicians and engineers can provide installation and training services. Our customer service team is also always available to answer any inquiries if needed.
Q: What's your payment term?
A: T/T or L/C, 30% as deposit, the balance needs to be paid before delivery, but after inspection.
Q: Can your pipe-bending machines be customized?
A: Yes, we can use your control systems and print your logo on the machine; OEM is accepted for Hippo.
Q: How do you determine the bending radius for a Boiler Tube Bending Machine?
A: The bending radius for a Boiler Tube Bending Machine depends on the tube material, diameter, and wall thickness. The machine's specifications typically provide a range of acceptable radii based on these factors. It's important to consider the material's ductility and strength, as using an incorrect radius can lead to tube deformation or cracking.
Q: Is the Boiler Tube Bending Machine suitable for both straight and pre-curved tubes?
A: Yes, the Boiler Tube Bending Machine can handle both straight and pre-curved tubes. For straight tubes, the machine performs a single bend, while pre-curved tubes may require more complex handling. The machine can adapt to these shapes by adjusting its bending mechanisms accordingly.
Q: Can a Boiler Tube Bending Machine be used for bending thick-walled tubes?
A: Yes, some Boiler Tube Bending Machines are specifically designed to handle thick-walled tubes, although the thickness and material strength will determine the machine's capacity. For thicker materials, it's important to use machines with higher hydraulic pressure and specialized tooling to prevent tube deformation or breakage.
Q: How long does it take to set up a Boiler Tube Bending Machine?
A: Setup time for a Boiler Tube Bending Machine varies depending on the complexity of the job and the machine type. For simple jobs, setup might take only a few minutes, while for more complex bending tasks or large batches, setup could take longer. Machines with CNC control typically reduce setup time as they store bending parameters for repeat jobs.
Q: What factors should be considered when choosing a Boiler Tube Bending Machine?
A: When selecting a Boiler Tube Bending Machine, key factors to consider include the tube material, diameter, and wall thickness, the machine's bending capacity (maximum angle, radius, and tube size), and whether the machine needs to be automated or manually operated. Additionally, the machine's overall precision, ease of operation, and maintenance requirements should be factored into the decision.
Technical Parameters
|
NC Technical Parameters |
|||||||||||
|
Model |
Unit |
NC38 |
NC50 |
NC65 |
NC76 |
NC90 |
NC110 |
NC130 |
NC168 |
NC219 |
NC273 |
|
Maximum bending capacity |
mm |
Φ38x1.8 |
Φ50x2.0 |
Φ65x2.5 |
Φ75x2.5 |
Φ89x2.5 |
Φ110x5.0 |
Φ130x5.0 |
Φ168x16.5 |
Φ219x16 |
Φ270x20 |
|
Round tube/stainless steel tube |
mm |
Φ 38x1.2 |
Φ 50x1.3 |
Φ 65x1.6 |
Φ 75x1.9 |
Φ 89x1.5 |
Φ 110x2.0 |
Φ 130x2.5 |
Φ 168x4.0 |
Φ 219x14 |
Φ 270x14 |
|
Square tube/metal |
mm |
30x1.5 |
40x1.8 |
50x2.3 |
60x2.5 |
75x2.5 |
90x2.0 |
90x6.0 |
110x6.5 |
189x14 |
200x14 |
|
Bending radius |
mm |
25~150 |
30~230 |
30~320 |
40~250 |
40~250 |
50~280 |
80~500 |
90~500 |
120~800 |
130~1000 |
|
Bending radius range/ Square tube |
mm |
25~130 |
30~190 |
35~210 |
40~240 |
45~105 |
50~300 |
80~430 |
90~410 |
120~801 |
130~1000 |
|
Bending angle range |
degree |
190 |
190 |
190 |
190 |
190 |
190 |
190 |
190 |
190 |
190 |
|
Maximum effective distance |
mm |
3200 |
2200 |
3200 |
4000 |
4000 |
4000 |
5000 |
6000 |
1400 |
6000 |
|
Workbench height (mold center to ground height) |
mm |
1100 |
1100 |
1100 |
1125 |
1100 |
1250 |
1300 |
1400 |
1400 |
1400 |
|
Mold center line height |
mm |
28 |
40 |
50 |
55 |
65 |
80 |
90 |
120 |
165 |
185 |
|
Bending [D.O.B] Speed |
deg/sec |
120 |
120 |
110 |
110 |
75 |
75 |
70 |
38 |
38 |
28 |
|
Bending (D.O.B| Sccuracy |
degree |
±0.1 |
±0.1 |
±0.1 |
±0.1 |
±0.1 |
±0.1 |
±0.1 |
±0.1 |
±0.1 |
±0.40 |
|
Hvdraulic svstem motor |
kw |
2.2 |
3.8 |
5.5 |
11 |
15 |
22 |
22 |
30x2 |
45x2+11 |
55x2+11 |
|
Machine width |
mm |
900 |
900 |
1150 |
1500 |
1500 |
1700 |
2000 |
2200 |
2300 |
3400 |
|
Machine width |
mm |
1300 |
1300 |
1400 |
1400 |
1500 |
2100 |
2100 |
2300 |
2300 |
2700 |
|
Machine length |
mm |
4300 |
4300 |
5800 |
6800 |
6800 |
7000 |
9000 |
10000 |
11000 |
11500 |
|
Machine weight |
kg |
850 |
1600 |
2800 |
3000 |
6200 |
8200 |
11000 |
22000 |
33000 |
55000 |
*Non standard models are customized according to customer requirements
*The data is for reference only, and the final technical parameters shall be subject to the technical agreement







