1. Before starting the roll bending machine, you must carefully check whether the motor, switch, circuit and grounding are abnormal, and check whether the operating parts and control keys of the equipment are stuck in the correct position. Check the overlap of the upper and lower molds; check whether each positioning device meets the requirements of the processing.
2. After the roll bending machine is started, run it idle for 1-2 minutes, and the upper roller shaft runs 2-3 times at full stroke. If there is an abnormal sound or a fault, the machine should be shut down and stopped working. The fault should be eliminated and it can be operated after it is normal.
3. During operation, one person should be responsible for commanding, so that the control technicians and the feeding and pressing technicians can cooperate with each other, and the technicians should be in position to send the cold bending signal.
4. When the roll bending machine is running, no one is allowed to stand behind the machine tool.
5. It is strictly forbidden to press the material directly at one end.
6. It is forbidden to fold thick iron steel plates or quenched steel plate materials, alloy steel, square steel and materials that have passed the computer numerical control cold bending performance to avoid damaging the CNC machine tool.
7. If the material workpiece or mold is not aligned during machine operation, the machine should be shut down and stopped for correction. It is strictly forbidden to correct by hand during machine operation to prevent injury.
8. Always check the overlap of the upper and lower molds; whether the display of the hydraulic gauge meets the specifications.
9. The material workpiece can only be taken out after the machine equipment stops and the lower roller is lowered.
10. If there is abnormal noise, impact, vibration or oil leakage, the machine should be shut down and stopped for inspection, and the operation can be resumed after it is abnormal; when maintaining the hydraulic system, be careful to prevent high-pressure oil from spraying and injuring people; during operation, the transmission mechanism and connecting parts should be checked frequently to ensure that there is no looseness.
11. After operation, cut off the power supply; clean the equipment and keep the environment clean every day; stack the process products neatly.
Roll bending machine operation skills
Oct 19, 2024
Leave a message







