1. The spindle speed must be changed after the machine is stopped. The gears must be fully meshed when changing speed. If the machine tool is found to be abnormal, stop and check immediately.
2. Adjust the tool and clamp the workpiece before cutting. The length of the clamping part shall not be less than 50 mm. The parking baffle must be fixed, and work can only be carried out after the clamping, loosening, forward and backward test runs.
3. When the machine tool is rotating, no part of the human body shall touch the transmission parts. When operating, the cuffs must be tied and it is strictly forbidden to work with gloves. The human head should deviate from the cutting direction.
4. When changing tools, measuring workpieces, lubricating, and cleaning pipe heads, the machine must be stopped.
5. When cutting pipe heads, prevent the pipe heads from flying out and injuring people.
6. When putting long material pipes into the material rack and loosening the binding wire, measures should be taken to prevent the pipes from rolling, impacting, and crushing people.
7. When using a grinding wheel pipe cutting machine, check whether the grinding wheel is damaged, cracked, or damp, and whether the power cord is reliable.
8. The dust removal device of the pipe cutting machine should be in good condition before cutting.
9. No one should stand in the direction of workpiece feeding and discharging.
Pipe cutting machine precautions
Oct 16, 2024
Leave a message







