During the operation of the pipe bending machine, all parts of the pipe bending machine can be protected under harsh environmental conditions (such as rain), improper operation and misoperation, and overload. Bending performance, pipe inspection Check whether the surface of the anti-corrosion mother pipe has oil stains, pits, bends, anti-corrosion layer wrinkles, anti-corrosion numbers and pipe numbers are unclear or written incorrectly, scars, mechanical damage and other appearance defects, and keep inspection records. All systems of the pipe bending machine are suitable for operation in an environment of ±40℃ and 0-100% humidity. The pipe bending machine is suitable for use in places with an altitude of 0-3000m. A suitable working place should be selected before the pipe bending machine is operated. The site should not only meet the accumulation of straight pipes and bent pipes, but also ensure that the ground can withstand the pressure of the equipment.
The main influence of the bending speed of the pipe bending machine on the forming quality is:
If the speed is too fast, it is easy to form the flatness of the bending part of the conduit, the roundness does not meet the requirements, and the conduit is torn and broken; if the speed is too slow, it is easy to form the wrinkling of the conduit and the slipping of the pressing block. The large-diameter pipe is easy to cause the sinking of the bending part of the conduit. According to a large number of tests on these two CNC pipe bending machines, the bending speed of the conduit is determined to be 20%-40% of the maximum bending speed of the machine.
Maintenance method of elbow bends
1. Elbows and bends that are stored for a long time should be inspected regularly. The exposed processing surface should be kept clean and dust should be removed. They should be stored neatly in a ventilated and dry place indoors. Stacking or outdoor storage is prohibited. Always keep the elbows dry and ventilated, keep the device clean and neat, and store them according to the correct storage method.
2. When installing, the elbows and bends can be directly installed on the pipeline according to the connection method and installed according to the direction of use. Generally, it can be installed at any position in the pipeline, but it needs to be easy to operate and inspect. Note that the flow direction of the cut-off elbow medium should be from the bottom of the longitudinal valve disc to the top, and the elbow can only be installed horizontally. When installing the elbow, pay attention to the sealing to avoid leakage and affect the normal operation of the pipeline.







